Product description

Loa by Ronan and Erwan Bouroullec is constructed with thick sIub yarns, which gives the textile a rich, natural, linen-like expression. The open structure provides clear views of the outside. Loa is woven with two solid yarn colours and include both subtle naturals and rich contrast colours.

Loa has a fantastic coarse open structure of 17%. Due to the open structure, the edges can never be completely sealed. This may cause slight fraying at the edges of the textile over time. Never pull the loose threads, this will only worsen the fraying. Should this occur, carefully cut off the loose threads with scissors.

Performance
  • LightFastness {{site.selectedConfiguration.lightFastness}}

    ISO 105-B02

    Lightfastness relates to the ability of a textile to retain its colour under light. When testing for lightfastness, samples are exposed to artificial daylight for a specified period.

    The evaluation scale ranges from 1 (worst) to 8 (best). An increase of one point corresponds to a doubling of the lightfastness, i.e. the same fading takes twice as long.

  • Visual light transmission {{site.selectedConfiguration.lightTransmission}}%

    Light transmittance indicates the percentage of the visible light penetrating the textile. Densely woven textiles in dark colours usually have a lower light transmittance, whereas loosely woven fabrics in light colours allow more light to pass through. 

  • Fire tests NFPA 701 • EN 13 773 class 1 • DIN 4102 B1 • NF P 92 507 M1 • BS 5867 part 2 type B • IMO FTP Code 2010 Part 7

    Flame retardant performance depends on the type of foam used. There are differing requirements concerning the flame-retardancy of textiles dependent on the area of application, country or even region. Our textiles pass the majority of international standards and are also tested for a selection of regional requirements. 

  • Solar reflection {{site.selectedConfiguration.solarReflection}}%

    Optical properties according to EN14500: 2008

    The percentage of solar radiation reflected by the textile.

  • Solar transmission {{site.selectedConfiguration.solarTransmissionTs}}%

    Optical properties according to EN14500: 2008

    The percentage of solar radiation penetrating through the textile.

  • Solar absorption {{site.selectedConfiguration.solarAbsorption}}%

    Optical properties according to EN14500: 2008

    The percentage of solar radiation absorbed by the textile.

  • Openness factor {{site.selectedConfiguration.opennessFactor}}%

    The percentage of openings in the textile.

  • g-value/ Solar Heat Gain Coefficient {{site.selectedConfiguration.solarHeatGainThroughTotalFenestration}}%

    Results are based on reference glazing D according to EN1450: 2005.

    The percentage of solar energy that penetrates through glazing and textile. A low value means good thermal performance.

  • Total visual light transmission - based on reference glazing G and according to EN14501:2021 {{site.selectedConfiguration.visualLightTransmissionGlazingTv}}%

    Results are based on reference glazing G acc. to EN14501: 2021.

    The percentage of visible light penetrating through the textile. If too much visible light is transmitted into a room, it creates brightness and glare problems. For rooms with PC workstations, the maximum recommended light transmission depends on the direction in which the window faces:


    North facades: 15–20% light transmission
    West and east facades: 2–6% light transmission
    South facades: 0–5% light transmission


    This is specified by the EU directive 90/270 and ISO 9241.

  • U-value - based on reference glazing G and according to EN14501:2021 {{site.selectedConfiguration.uValueWM2K}}

    Results are based on reference glazing G acc. to EN14501: 2021.

    U-value describes the thermal heat loss (or gain) through a fenestration. The U-value reflects the energy flow through glass and fabric when there is a temperature difference between outside and inside, and is the insulating property. The lower the value, the better the textile's thermal heat insulation properties. 

  • Marine use
  • Fire resistant
Care
  • Cleaning and care:
    gDo not wash
    BDo not bleach
    CDo not tumble dry
    aDo not iron
    LDo not dry clean
Characteristics
  • Produced in: Germany
  • Warranty: 5 years
  • Colour difference: Slight differences may occur
  • Roll length: Approx. 30 lin. m (Approx. 33 yds)
  • Sustainability documentation:: Greenguard Gold, HPD, EPD
Downloads
Produced in Germany